Vive DT !!!

[Nicooo]

Bonjour,
je suis un peu largué avec la doc fstab..
SInon j'y suis presque

Code :

nico@nico-desktop:~$ sudo blkid
[sudo] Mot de passe de nico :
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/nvme0n1: PTUUID="13648b6e" PTTYPE="dos"
/dev/nvme0n1p1: UUID="d8a44515-6b54-4a64-9d83-871b86fb8d87" TYPE="ext4" PARTUUID="13648b6e-01"
/dev/nvme0n1p5: UUID="9312bc71-0fe2-4cf5-95ab-b616277fbf12" TYPE="swap" PARTUUID="13648b6e-05"
/dev/sda1: PARTLABEL="Microsoft reserved partition" PARTUUID="ccc0854d-7131-4a0a-b885-b3f9152ef5dc"
/dev/sda2: LABEL="DATA4" UUID="9898F27798F252EC" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="305445fc-83e8-44fe-b35e-ca63d7d3f642"

Le Hdd que je veux ajouter en montage au démarrage c'est

Code :

/dev/sda2: LABEL="DATA4" UUID="9898F27798F252EC" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="305445fc-83e8-44fe-b35e-ca63d7d3f642"

Concernant le fichier fstab

Code :

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/nvme0n1p1 during installation
UUID=d8a44515-6b54-4a64-9d83-871b86fb8d87 /               ext4    errors=remount-ro 0       1
# swap was on /dev/nvme0n1p5 during installation
UUID=9312bc71-0fe2-4cf5-95ab-b616277fbf12 none            swap    sw              0       0

il faut que je rajoute à la suite :

Code :

# / was on /dev/sda2 during installation
UUID=305445fc-83e8-44fe-b35e-ca63d7d3f642 /               ntfs    errors=remount-ro 0       1

C'est bien ça?